一直都覺得客廳的 32” LCD TV 太細，但沒考慮過要換，因為它仍然很新呢!
突然家姐姐夫要買電視，家姐只是隨意在MSN跟我說說，我才剛回覆她我也很想換但不會換了，不想浪費。
下一分鐘，我的搜尋病又發作，用電視型號 search 一下，再加上知道了價錢，結果以9秒9 極速回覆她 “OMG!!! 我要買呀! ”
接下來花了一點時間在網上研究這部電視的資料&格價，再終勁快速地在兩日之間便為 sweet home 添置了這部 50” Plasma TV 了。
( LG 50” Plasma TV )
( 見到個盒咁大個已經覺得好興奮，好想師傅快D黎安裝 )
( 看了四年多LCD，唔知而家轉睇 Plasma 會唔會唔慣呢?! )
( 掛牆架連工包料 $680 )
( HDMI線本來只送一條，不過我話唔夠用，Sales 再送多左一條 )
( Before : 32” LCD TV o係廳裏面真係勁細 )
( After: 安裝完成，其實唔係好大架咋~ )
( 原來個掛牆架係活動架，上下左右都有空間可以轉的 )
( 根據呢個標準去計算，我個廳原來要放 95” 先o岩，死未 
( 聽落會覺得 50” 係勁之大，安裝左之後就覺得其實係剛剛好 )
Nice TV! 我連房都用 37" la! ( 房用 50" 會ng會好過分?)
回覆刪除[版主回覆04/25/2010 17:35:00]50" 房用，如果係打機房 or 你經常用的話，都唔過份既 , haha :)
咁幾多錢呀?
回覆刪除[版主回覆04/25/2010 17:36:00]原本特價$9,999....結果搵到一間 $9800, 一陣又再搵到一間 $9490....最終因為一次過買兩部，所以再由 $9300 減到最後 ＄9200, 係咪好抵先!
咁你個廳咪勁大??
回覆刪除[版主回覆04/25/2010 17:37:00]勁大又講唔上，不過個距離差唔多12尺，如果睇30幾吋會覺得好細，好唔夠。
可否告知我 $9200是那一處買,我現在都是看32" 都是覺得不足夠,想買一部plasma 50",我看了很多地方都沒有你那一個價錢 !
回覆刪除[版主回覆04/30/2010 11:25:00]標價是$9,999...... 要講價先有咁既價錢，而且我當日係一次過買兩部。 鐳射旺角分店
Nice Plasma TV!!!! Base on the technology, the picture quality is much better than LCD / LED LCD TV. Especially when u watching blu-ray movie. BTW, I am also studying this LG Plasma TV.. may I ask.... a. $9200 with LG wall-mount? b. Do u need to pay extra for the installation fee? THANKS!
回覆刪除[版主回覆10/03/2010 23:20:00]wall-mount not included, $680 added(installation fee included)
不過個距離差唔多12尺 <---- What a big apartment!!! Then u should try try projector la... Trust me u will not disappointed!
回覆刪除[版主回覆10/03/2010 23:21:00]i want to try projector too!!!
THANKS!!! BTW is your Plasma good? As I heard ppl said Plasma need to "warmup" for 1st 100-150hours. Is the image-burn serious? I heard many ppl said if watching TVB for a while, the TVB log (right upper corner of the screen) will be burn on the screen....
回覆刪除[版主回覆10/04/2010 22:08:00]i like this Plasma much i don't think it needs to warmup. The image-burn is acceptable, when i change to another channel, the image-burn will disappear soon.
THX again for your HELP!!! BTW here is something about Plasma 燒印問題可參考以下報告: Usually it takes at least about 100-150 hours of use before you get the best picture quality from a plasma display, nevermind the brand. For that reason, it is always good to arrange a serious calibration (and/or test) when the display has 200 hours or more. The best way I suggest you for doing the initial break-in, for those who are interested in that, is to use a 100 IRE pattern (full white), and run it on the display for about 2 hours for session. Then turn off the TV and leaving it off for 1 hour or more, so that the electronics and the panel get perfectly cool, and then repeat the session, and so on. Contrast should be set around 70%, and power saving function to low (or to off if the "low" option is not available). You can also use the internal timer from the OSD to turn off the TV (I don't know how it works on these new models). About 100 hours of break-in by using that system, and you will be OK The interesting thing on the LGs plasma, on the previous 2008 and 2009 series, and I guess it is the same for these new models, is that you have that 100 IRE (full white) pattern available from the OSD. On the E.U. 2008 models its name was "refreshPDP". They offer it to clean the display in case of bad IR, but it is also perfect for the break-in BTW, there should be also the "Orbiter" (I don't know the exact name on these new U.S. models) function available from the same OSD setup (if you don't find it on that setup, search for it in the PDF manual). It helps to reduce image retention (IR), and it is always a very good thing to use it during gaming.
回覆刪除[版主回覆10/06/2010 18:30:00]Thanks!